Dispersive SPE PSA/GCB/C18 Clean Up Tube (Magnesium sulfate 150mg, PSA 50mg, GCB50mg, C18 50mg), 2ml 50 Hộp

Dispersive SPE (Carbon 500mg /PSA 500mg) 6ml 50 Hộp

Dispersive SPE (PSA 50mg, Magnesium sulfate 150mg, C18 50mg), 2ml 50 Hộp

Dispersive SPE (Magnesium sulfate 150mg, C18 50mg), 2ml 20 Hộp

Dispersive SPE (Magnesium sulfate 150mg, PSA 50mg, C18 50mg), 2ml 30 Hộp

Dispersive SPE (Magnesium sulfate 4g, NaCl 1g) 30 Hộp

Dispersive SPE (Magnesium sulfate 6g, Spdium Acetate 1.5g) 30 Hộp

Cột SPE CHROMABOND Easy, 80 µm, 3 mL/200 mg 30 Hộp

Cột SPE-L 100 µm, Styrenbe-divinybenzene 500mg/3ml 100 Hộp

Cột SPE Poly-sery Cartridge 500mg/6ml 40 Hộp

Oasis HLB 6 cc Vac Cartridge, 200 mg Sorbent per Cartridge, 30 um 30 Hộp

Oasis HLB 3 cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 um 30 Hộp

13 Oasis WAX 3cc Vac Cartridge, 60 mg Sorbent per Cartridge, 30 um 20 Hộp

STT part number mô tả Số lượng

phụ kiện cho pump

1 655-1080 plunger Seal 8

2 638-1423 filter ( folw path) 4

3 810-1433 Packing A (PACK 10) 1

4 810-1434 Packing B (PACK 10) 1

5 810-1005 Check valve out 1

6 810-1004 Check valve in 1

7 890-6502 Solenoid valve (For Low Gradient) 3

8 890-1194 Leak Sensor 6

9 885-2920 Drain valve seal 3

10 HI-810-1128 Hitachi, DRAIN VALVE PACKING 3

11 885-1050 packing for 4 ways joint 3

phụ kiện cho auto sampler

12 890-3183 Injection port seal 3

13 890-3243 Injection valve seal 3

14 080-3737 Plunger tip(0.1ml) 1

15 890-3228 L-2200 0.1 ML SYRINGE, For L-2200 1

16 890-2177 Inlet tube assy, ID 0.25 × 0.66 T 3

17 890-2527 W lamp 1

18 810-1355 Screw D 6

19 835-2064 Screw 6

20 F257114 Teflon Tube 1.0IDx0.5Tx10M 1

21 634-1976 Stainless steel pipe, 0.25 mm ID × 1.57 mm OD × 5 m 3

22 L329235 SUS push screw (M6) 12

23 655-1458 SUS push screw S 12

24 638-1099 SUS ferrule (SUS 316) 1/16 inch 24

25 634-1976 Stainless steel pipe, 0.25 mm ID × 1.57 mm OD × 5 m 1

1100 Gradient valve assembly, G1311-67701, Agilent

Isolation seal for valves, 0100-1852, Agilent

Leybold Vacuum Products Inc Leybonol LVO 700 Synthetic Cyclic Hydrocarbon, 2 L

Supplier: Leybold Vacuum Products Inc L70002

[THERMO-26066-1540] Dioxin polar confirmation column, temperature stable, TGDioxin 60m x 0.25mm x 0.25um

G1312-68741 Preventive Maintenance Kit for 1260 Infinity/Infinity II Binary Pump.
G1310-68742 seal wash PM kit
G1312-60020 AIV cartridge 600 bar
G1312-60027 outlet valve
G7129-68740 PM kit for G7128AIC
2140-0820 Infinitylab long-life deterium DADIMWWD LAMP

MÁY LY TÂM 5 - 15KG CÓ BIẾN TẦN : 01 cái

- Thương hiệu: VinaOrganic

- Model: LT3827

- Kích thước máy (LxWxH): 860x650x560mm

- Kích thước lồng (ØxH): Ø380xH270mm

- Điện áp sử dụng: 220V/50Hz

- Công suất động cơ: 2Hp

- Hộp biến tần điều chỉnh tốc độ: Có

- Khung, đế, đáy bằng gang chịu lực; lồng, vỏ bằng inox 304;

5 #L Syringe Metal Plunger w/ PTFE Seal N6101390

KIT MS 9MM SCREW VIAL ULB SEPTA 100PK N9310064

V/G, 1/16" Std Ferrule, 0.4mm ID, 10pk 09920104

PKI Green Injection Port Septa, Pkg. 50 N6621028

Quartz Liner for Spit Operation, 2 mm ID N6121004

O-Ring 9.32 OD x 5.32 ID 09921004

Hydrocarbon Trap, 1/8 Fittings N9301192

Moisture Trap, 70 mL 1/8 Fittings N9301193

M1000 Oxygen Trap, 1/8 Fittings N9301179

Vial Diffuser Molding N6101276

4 mL Clr Scr Vial 15 x 45 13-425 PER PC. 09923031

Hydrogen Generator Deionizer LE Bag N9307097

[AT-12103101] ABS Elut-NEXUS, 60mg 3mL, 100/PK, 9P

Product

[AT-5982-5650] QuEChERS Extract Tubes, EN Method, 9P

[AT-5982-5156] Dispersive SPE 15ml, Fatty Samples, EN, 9P

Product

[AT-820999-901] High Perf. ZORBAX Guard Fittings Kit, BC

[AT-5185-5863] Blue screw cap,PTFE/sil septa,500pk, 58

[AT-G1329-87300] SST capillary 90cm, 0.17mm id, 1/16 fitt, AA

[AT-5183-4712] Lnr,gen purp split/spltls,tpr,GW, 5/PK, 58

[AT-RMSH-2] Big Universal Trap, 1/8inch fttgs,Helium, 58

Product

[AT-0100-2144] 1/8inch Ball Valve, 58

[AT-RMSN-4] Big Universal Trap, 1/4i fttgs, Nitrogen, 58

[AT-G1316-87300] Capillary, 0.17x90mm 1/16 in male/male, AA

[AT-01090-87611] Capillary ST 105 X 0.12mm S/S, AA

[AT-963954-302] Eclipse XDB-C18 Solv Save 3.5u,3.0x150mm, BC

[AT-G7005-60061] Filament,high temperature EI for GCMS, AA

[AT-G7005-60061] Filament,high temperature EI for GCMS, AA

[AT-5190-6144] Gold Seal, Ultra Inert, w/Washer, AA

[AT-5080-8750] Fittings 1/8inch Brass 20/PK, 58

[AT-5190-9007] LCMS PM Kit, ESI, MS40+ RP, 58

[AT-5188-6496] QuickPick Split Vent + Inlet PM Kit, AA

[AT-5182-0731] Septa, PTFE/red silicone, 8.7mm 100/pk, 58

[AT-1460-2571] Canted coil spring, AA

[AT-G1960-67100] Universal Inlet Filter Replacement Kit, AA

[AT-5182-0553] Screw cap and clear vial kit 100/PK, 58

[AT-8010-0418] 18mm hdsp septa PTFE/silicone 1000/pk, 58

[AT-G1969-85000] ESI-L Low Concentration Tuning Mix 100ml, AA

[AT-AVF60M] Agilent Avf60m Mineral Oil for Rotary Vane Vacuum PUMPS 1qt / 1 Liter

Product

[G20163-15173] ChraPart #G20163-15173, alternative to Agilent part# 5181-1267, 10µL Standard Syringe, Fixed Needle, 23-26 Gauge

[G20163-CA11421] ChraPart #G20163-CA11421, alternative to part# 228-35871-96, Line Filter Assembly, Comparable to OEM # 228-35871-96,

[G20163-C10722] ChraPart #G20163-C10722, alternative to part# G1313-68709, Autosampler Preventative Maintenance Kit, Comparable to OEM # G1313-68709,

[G20163-C21169] ChraPart #G20163-C21169, alternative to part# G1316-87300, Assy, Capillary, 90mm x 0.17mm ID, w/Fittings, Comparable to OEM # G1316-87300,

[C5181-8830] ChraPart #C5181-8830, Column nut, universal 2/PK, alternative to Agilent part 5181-8830

[C5062-3514] ChraPart #C5062-3514, Ferrule, 0.5mm VG 0.32 col 10/PK, alternative to Agilent part 5062-3514

[G20163-C11240] ChraPart #G20163-C11240, alternative to part# 5063-6591, ED020005, Fingertight One Piece 10-32 PEEK Male Nut/Ferrule for 1/16", OD Tubing, 10/pk, Comparable to OEM # 5063-6591, ED020005,

[G20163-C10683] ChraPart #G20163-C10683, alternative to part# 01018-22707, PTFE Frits, 5/pk, Comparable to OEM # 01018-22707,

[C670-15003-04] ChraPart #C670-15003-04, alternative to part# 670-15003-04, 15% Graphite/85% Vespel Ferrule with 0.4mm ID hole, 10PK, Comparable to OEM # 670-15003-04

[C5188-5366] ChraPart #C5188-5366, Liner O-Ring, Non-Stick Flip-Top, alternative to Agilent part 5188-5366

[C221-75194] ChraPart #C221-75194, alternative to part# 221-75194, Liner, glass, split/splitless, deactivated, for SPL-2010 plus, 2010, 2025 - Pack of 5, Comparable to OEM # 221-75194

[G20163-14996] ChraPart #G20163-14996 Liner O-Rings alternative to Shimadzu 036-11203-84, O-RING, 5pk

[G20163-C14093] ChraPart #G20163-C14093, alternative to part# G1312-60067, Outlet Ball Valve (600 bar), Comparable to OEM # G1312-60067,

[G20163-C14101] ChraPart #G20163-C14101, alternative to part# G1312-60066, Passive Inlet Valve, Comparable to OEM # G1312-60066,

[G20163-C14133] ChraPart #G20163-C14133, alternative to part# 228-32628-91, Gold Plunger Seal, Comparable to OEM # 228-32628-91,

[C228-35403] ChraPart #C228-35403, alternative to part# 228-35403-00, PEEK male nut for plumbing line between inlet block and check valve for LC-20AD/AB and LC-10ADvp - Pack of 1, Comparable to OEM # 228-35403-00

[G20163-C11313] ChraPart #G20163-C11313, alternative to part# 228-36923-00, Rotor Seal, LPV, Comparable to OEM # 228-36923-00,

[G20163-C11088] ChraPart #G20163-C11088, alternative to part# 0905-1420, Gold Piston Seals, 2/pk, Comparable to OEM # 0905-1420,

[G20163-C14133] ChraPart #G20163-C14133, alternative to part# 228-32628-91, Gold Plunger Seal, Comparable to OEM # 228-32628-91,

[G20163-C10417] ChraPart #G20163-C10417, alternative to part# 5063-6589, Black Piston Seals, 2/pk, Comparable to OEM # 5063-6589,

[G20163-C14148] ChraPart #G20163-C14148, alternative to part# G1313-68719, PM Kit, G1329B Autosampler, Comparable to OEM # G1313-68719,

[G20163-C14146] ChraPart #G20163-C14146, alternative to part# G1312-68741, PM Kit, G1312 Binary Pump Comparable to OEM # G1312-68741,

[G20163-C21577] ChraPart #G20163-C21577, alternative to part# G1367-68741, PM Kit, G1367E, Comparable to OEM # G1367-68741,

[G20163-C10683] ChraPart #G20163-C10683, alternative to part# 01018-22707, PTFE Frits, 5/pk, Comparable to OEM # 01018-22707,

[G20163-C11313] ChraPart #G20163-C11313, alternative to part# 228-36923-00, Rotor Seal, LPV, Comparable to OEM # 228-36923-00,

[G20163-CA11454] ChraPart #G20163-CA11454, alternative to part# 5067-4728, Seal Cap Assembly, Comparable to OEM # 5067-4728,

[G20163-C10621] ChraPart #G20163-C10621, alternative to part# 0905-1503, Seal, Pump, Comparable to OEM # 0905-1503,

[G20163-C12605] ChraPart #G20163-C12605, alternative to part# G1329-87017, Needle Seat, Std., PEEK&trade, 0.17mm ID, Comparable to OEM # G1329-87017,

[C5183-4761] ChraPart #C5183-4761, Septa Non-Stick Long Life 11mm 50pk, alternative to Agilent part 5183-4761

[C670-11009] ChraPart #C670-11009, alternative to part# 670-11009-00, NUT, COLUMN connecting column to MS on QP2010 Series - 1/16 (5/PK), Comparable to OEM # 670-11009-00

[G20163-C21045] ChraPart #G20163-C21045, alternative to part# 228-45590-91, SUS Tubing A, Comparable to OEM # 228-45590-91,

[G20163-C21044] ChraPart #G20163-C21044, alternative to part# 228-45590-92, SUS Tubing B, Comparable to OEM # 228-45590-92,

[C228-48826-92] ChraPart #C228-48826-92, alternative to part# 228-48826-92, Stainless Steel Tubing, 0.1mm x 0.8mm x 600 mm, SIL-20A/ACXR (1/PK), Comparable to OEM # 228-48826-92

[G20163-15173] ChraPart #G20163-15173, alternative to Agilent part# 5181-1267, 10µL Standard Syringe, Fixed Needle, 23-26 Gauge

[C221-34618-00] ChraPart #C221-34618-00, alternative to part# 221-34618-00, Syringe, GC, 10uL 0.63 OD, AOC-14/17/20 (1/PK), Comparable to OEM # 221-34618-00

Product

[SI-225-15718-91] Shimadzu, CDL PIPE ASSY

[SI-225-20310-91] Shimadzu, FILAMENT FOR PBI, ROHS

[SI-228-18872-84] Shimadzu, FILTER PACKING ASSY 1PC

[SI-228-18872-84] Shimadzu, FILTER PACKING ASSY 1PC

[SI-228-18872-91] Shimadzu, FILTER, PACKING

[SI-228-35097-05] Shimadzu, GASKET

[SI-220-90418-14] Shimadzu, FERRULE-CAP 0.4MM ID GVF004 10/PKG

[SI-221-41444-01] Shimadzu, GLASS INSERT, SPL-2010

[SI-225-09490-01] Shimadzu, IG GAUGE

[SI-225-09490-01] Shimadzu, IG GAUGE

[SI-225-15877-92] Shimadzu, Corona Needle, LCMS-2020, TQ, QTOF

[SI-201-35584] Shimadzu, RUBBER SEPTUM,INJ.PORT 20/PKT

[SI-201-35584] Shimadzu, RUBBER SEPTUM,INJ.PORT 20/PKT

[SI-220-97808-02] Shimadzu, OIL, 1L ULTRAGRADE 15, E2M1.5

[SI-220-97808-01] Shimadzu, Oil, Rotary Pump, Ultragrade 19, 4L (RV3 & 5)

[SI-220-91239-03] Standards, LCMS, Sensitivity Check LCMS-8030/40/45/50/60, Reserpine 1000pg/uL.

[SI-220-91239-30] Standards, LCMS, Tune Solution, TQ Series, 100mL Volume

Product

[P1720-00245] Robot Coupe 27074 Fine Serrated "S" MFR #: 27074

[ROBOT-39757] LID ASSEMBLY BLIXER 3D

Product

[SI-228-48249-91] Shimadzu, CV IN-SPB D1.588

Product

[G20163-15269] ChraPart #G20163-15269, alternative to Hitachi part# 650-1500, XENON LAMP USHIO UXL 152, 1pk

Product

[OV-ZX4930] OV, 1.5M x 1/4" SS 10% Macrogol 1000R W-HP 80/100 Agilent 68/7890A

Product

[P2623-21436] Fisherbrand™ RS232 Thermal Printer for accumet™ AB and XL Series Benchtop Meters

Product

[8LZ250-0239899] Infochroma AG, Stainless steel migration cell Sieg-Mi-Flex

[8LZ250-0218672] Infochroma AG, Stainless steel central ring

Product

[SGE-18060002] SGE SILANIZED QUARTZ WOOL - 0.5GMS, ea.

Product

[THERMO-035393] Dionex IonPac IC Columns, AS7, 4X250MM

[THERMO-035394] Dionex IonPac IC Columns, AG7, 4X50MM

Product

[SI-221-41444-01] Shimadzu, GLASS INSERT, SPL-2010

Code Tên sản phẩm ĐVT Tham khảo Số lượng

TKE33900 Cột L10 (150mm x 4.6 mm; 5µm) cái 1. Inertsil CN-3, 5020-01940

2. Discovery Cyano, supelco,

3. Hypersil GOLD™ Cyano, 25805-154630

4. Hypersil BDS Cyano 28805-154630

1.00

TKE33800 Cột L51 (250mm x 4.6 µm; 5µm) cái

1.00

TKE33900 Cột L10 (150mm x 4.6 mm; 5µm) cái

1.00

TKE34000 Cột L67 (250mm x 4.6 mm; 5µm) cái