Obsolete. Replaced by 5183-4477. Caps/septa, crimp, headspace, 20 mm, silver aluminum, tan PTFE/silicone septa, 100/pk 8010-0116

22mL Clear Round Bottom Crimp Headspace Vial, 100pk 8010-0152

Filter, oil mist, for MS40+ pump G1960-80039

Rotor seal, 3 grooves, max 600 bar, for thermostatted column compartment, switching valve p/n 0101-0920 or G1158A switching valve. Compatible with 2 position/6 port valve head, 600 bar, bio-inert (5067-4148) 0101-1409

Cloth, lint-free, 23 x 23 cm, 100% cotton, 15/pk 05980-60051

Needle seat, PEEK, 0.12 mm ID capillary, for 1290 Infinity II vial sampler G7129-87012

ESI-L LCMS Tuning Solution. Tuning Mix for LCMS Instruments (Including ESI-TOF) G1969-85000

API-TOF Reference Mass Solution Kit G1969-85001

ZORBAX RRHD Eclipse Plus C18 Column, 2.1 x 100 mm, 1.8 µm, 1200 bar 959758-902

ZORBAX RRHD Eclipse Plus C18 Column, 2.1 x 50 mm, 1.8 μm, 1200 bar 959757-902

4-Channel Degassing Unit G1311-60070

G1311-67701

Frit for Agilent 1290 Infinity LC pump outlet filter, 2/pk 5067-5716

Preventive Maintenance Kit for Isocratic and Quaternary Pump (G1310A/G1311A). Includes piston seal, PTFE frits, 2 seal caps G1310-68730

Seal wash PM kit for Agilent 1260 Infinity pump G1310-68742

Rotor Seal PEEK-1300bar for Flexible Pump 5068-0202

Preventative Maintenance Kit for 1260 Infinity II Vialsampler (G7129A/C) G7129-68740

InfinityLab Quick-Connect heat exchanger, standard. 0.12 mm id, 1.6 µL G7116-60015

3-Way Valve, CDS Isolation G1960-60225

Performance maintenance kit, LC/MS, for 1 MS40+ pump, Jet Stream equipped 5190-9008

AVF Platinum X3760-64004

Big universal trap, Argon, 1/8 in, 300 psig, 750 cc RMSA-2

Agilent Gas Clean carrier gas purifier CP17973

Sampler cone gasket, graphite, for Agilent 7700, 7800, 7850, 7900, 8800 and 8900 ICP-MS, 3/pk. G3280-67009

Octopole assembly, with axial accelerator, for Agilent 8900 ICP-MS G3666-67045

Octopole assembly, without axial accelerator, for Agilent 8900 ICP-MS G3666-67046

Spray chamber drain tube assembly for Quartz Scott double-pass G3280-60555

Agilent Cool Clear coolant fluid 7.6L/pack 5799-0037

Peristaltic pump tubing set for pumping drain/uptake, for Agilent integrated autosampler (I-AS), Tygon, with connectors, 5/pk G3160-65327

ICP-MS checkout solution, required by Agilent installation engineer to validate Agilent 7700 performance on site 5185-5850

ICP-MS lens polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200 G1833-65404

GC Column DB-5MS 30m, 0.25mm, 0.25µm 122-5532

GC inlet seal, gold plated, with washer 5188-5367

AVF 45 platinum, 1 qt 5191-5851

Agilent Gas Clean carrier gas purifier CP17973

Oil mist filter for RV5 pump, for MS, SCD/NCD G6600-80043

Filament, high temperature, EI ion source G7005-60061

Inlet liner, Ultra Inert, split, straight, glass wool, 5/pk 5190-3164

Column nut for MS interface 05988-20066

Ferrule, 0.5 mm id, 15% graphite/85%Vespel, 0.32 mm column, 10/pk 5062-3514

QuickPick PM kit, for splitless inlet and vent 5188-6497

Igniter glow plug assembly 19231-60680

FID jet, universal fit, 0.011 inch id 5200-0176

FID collector insulator G1176-20708

Collector Body 19231-20960

Gas Clean oxygen purifier CP17970

Gas Clean moisture purifier CP17971

Agilent Gas Clean hydrocarbon purifier CP17972

Hydrocarbon trap, 1/8 in, S-shaped 5060-9096

Moisture trap, high pressure, stainless steel, 1/8 in, 2000 psig MT-2-SS

Enhanced preventative maintenance kit, 7697A G4556-67012

Flexible Metal ferrule, UltiMetal Plus, 0.8 mm id, for 0.53 mm id fused silica tubing, 10/pk G3188-27503

Deactivated Fused Silica, High Temp, 5 m, 0.53 mm, 0.67 mm OD 160-2865-5

Stainless steel tubing, ProSteel, deactivated, 5 m, 0.53 mm, 0.67 mm od 160-4535-5

Ferrule, low thermal mass, column id 320 µm, 0.5 mm id, 5/pk 5190-1438

Inlet liner, splitless, straight, deactivated, quartz, 25/pk 5183-4704

GC Test Sample for Nickel Catalyst Tube, nickel monoxide powder, 1 gram 5080-8761

Pneumatics flow block weldment G4556-64030

EXCH -Split Flow Turbopump 200-200-30 G1969-89010

Quick Connect capillary stainless steel 0.17 x 150 mm M4 5500-1291

Abrasive powder, aluminum oxide, 100 g 393706201

EI 350 ion source extraction assembly, used with series 5977 and 7000 gas chromatography/mass spectrometry systems G3870-67720

Heater/sensor assembly for FID, TCD, NPD, and S/SL valves and detectors, used with series 7890 gas chromatography systems G1530-67950

Repeller insulator. For Agilent 5975 and 5973 MSD G1099-20133

Repeller, for Agilent 5973, 5975, and 5977 MS G2589-20044